How Much Does It Cost To Stain A Floor?

Staining hardwood floors costs between $1 and $3 per square foot. Prices can vary due to the quality and type of stain and the price of labor in your area. Low-end stains average $30 per gallon, and high-end ones can go for $100 per gallon. Prepare to wait up to 24 hours between stain applications.
How much does it cost to stain a log home? how to bid a stain job.

List Contents

How much does it cost to stain wood floor?

The national average materials cost to stain a wood floor is $0.33 per square foot, with a range between $0.31 to $0.35. The total price for labor and materials per square foot is $1.21, coming in between $1.10 to $1.31. A typical 300 square foot project costs $362.43, with a range of $331.04 to $393.81.

Is it cheaper to stain wood floors or replace?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. … Even if you have this, it will still be less expensive then replacing the whole floor.

How much does it cost to sand and stain a floor?

Professional hardwood floor refinishing costs $1.50 to $5.00 per square foot without staining. The average cost to sand, restain, and refinish wood floors is $2 to $7 per square foot. Refinishing hardwood stairs costs $25 to $85 per step. DIY costs to redo and resurface wood floors is $600 to $1,100.

Is it cheaper to refinish floors or carpet?

When comparing the cost of installing hardwood floors over carpet, quality hardwood flooring will almost always be a larger investment compared to carpet. Installing hardwood floors can cost between $12 and $20 per square foot installed, while carpet often cost about $6 to $12 per square foot installed.

See also  What Is The Purpose Of Edwards Sermon?

Can you stain a floor without sanding?

Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

How do I bid a stain job?

  1. Measure the length and width of each section of the deck. …
  2. Consider the cost of the deck stain in regards to how much stain you require for the project. …
  3. Determine the cost to clean and repair the deck before staining. …
  4. Estimate the amount of time you require to clean and stain the deck.

How much does it cost to refinish 1000 square feet of hardwood floors?

Flooring square footage Average cost
100 – 250 sq. ft. $600
251 – 500 sq. ft. $750
501 – 750 sq. ft. $1,601
751 – 1000 sq. ft. $2,100

Can you stay in house while floors are refinished?

The strong scent of polyurethane and stain lingers in the atmosphere for very long and can kick-start a migraine any time or all the time. Even if it’s not causing migraines, it’s still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air.

Can you stain hardwood floors darker?

The answer is usually YES! Many homeowners don’t realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it’s true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn’t matter if you are going light to dark or vice versa.

How much does it cost to stain?

National Average Cost $729
Average Range $448 to $1,010

How much does it cost for Hardwood Floors 1500 SF?

Expect to pay between $4,500 and $30,000 for 1,500 square feet of solid wood flooring. The species of wood you choose for your home can be a big determinant of the installation costs.

How often do wood floors need to be refinished?

A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years.

How long does it take to refinish floors?

In general, it will usually take 3-5 days to refinish hardwood floors with an oil based polyurethane (+ drying time), pending on whether there is a stain/how dark the stain is/how humid it is and how many coats of polyurethane you apply.

Can I refinish hardwood floors myself?

If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.

Does carpet ruin hardwood floors?

If you do not install your liner, carpet pad, and carpet correctly, you can damage your hardwood floors. … A plastic carpet padding will scuff the surface of your hardwoods over time. The use of staples to secure carpet padding will put holes in the floor; dave them for the perimeter to reduce blemishes.

Do I need to polyurethane after staining?

In general, you should wait between 24-48 hours for the stain to dry before polyurethane. If you don’t want to take any chances or think the stain might not be dry enough, wait an extra day before applying poly.

How can I stain my floors darker without sanding?

  1. Clean the Floor Before Staining. …
  2. Do Not Strip Old Stain. …
  3. Use a Pre-Stain Wood Conditioner. …
  4. Do Not Rush the Process.
  5. Stain Your Floors with Stain Pens. …
  6. Let Your Stain Dry Out Completely. …
  7. Stain Your Floors Right.
See also  How Do Rods Differ From Cones In The Retina Quizlet?

Can you change wood floor color without sanding?

Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!

What does it cost to Restain a house?

cost to stain a house exteriorNational Avg. Materials Cost per square foot$0.55National Avg. Cost (labor and materials) for 300 square foot$761.72National Cost Range (labor and materials) for 300 square foot$446.78 – $1,076.66

How much does it cost to stain a deck per square foot?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

How many times can you stain wood?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.

Can you change color of hardwood floors?

When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.

How hard is it to Restain hardwood floors?

The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new. The job requires using a buffer, which you can rent at a home center, and a vacuum to suck up dust.

Is it cheaper to refinish hardwood floors or replace with laminate?

The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.

Can I sleep in my house after refinishing hardwood floors?

If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project …

How long after staining a floor can you walk on it?

After cleaning up the inevitable dust with your shop vac and tack cloths, apply the second, final coat of sealer, then let it dry. You typically must wait 24 hours before being able to walk safely on the floor again, and as long as 72 hours before replacing furniture in the room.

Should I remove baseboards before refinishing hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. … The only time that we would really want you to remove your base or shoe is if your floors have been refinished multiple times and the base was left on during that process.

What color floors never go out of style?

White and black create the perfect contrast for whatever you place it on. The two colors mesh together perfectly, while also creating definitive lines between their separation. That’s why black and white have been used for flooring designs for a long time.

See also  Is Creosote Still Legal?

Do I have to sand my hardwood floors before staining?

Yes. When you want to stain or change the color of your hardwood floors, you MUST fully sand and refinish the floors. If you don’t sand the floors first, the stain won’t properly penetrate the hardwood nor will the polyurethane properly adhere. This is the ONLY way to change the color of your hardwood floors.

How many coats of stain do I need for hardwood floors?

How many coats will be applied? The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional costs of finish may be applied depending on the need.

Do you need to seal stained wood?

After staining wood do you have to seal it? Yes, when staining wood you must apply a sealer to protect the stained surface. The stain will highlight the grain in the wood but it will not protect it, meaning it is extremely susceptible to damages from liquids, foods, human touch, and other sharp objects.

How much stain do I need for a 12×12 deck?

How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.

How much does it cost to stain a 10 x10 deck?

A 10’x10′ deck covers 100 square feet, with a typical staining cost of $300. A 12’x12′ deck covers 144 square feet, costing an average of $432. 8’x10′ works out at 80 square feet, with a final cost of $240. A deck measuring 10’x20′ covers 200 square feet for a typical cost of $600.

How much does it cost to redo the floor of a house?

Cost to Refloor a House The cost to redo floors in a 1,000 square foot area runs from $7,000 to $28,500. This includes the cost to tear out and dispose of old flooring, install a new subfloor and baseboards, purchase new materials and install a new covering.

Do buyers prefer carpet or hardwood in bedrooms?

Now there are some factions who want to feel soft carpet under their feet in the bedroom. On lower-level rec rooms and basements, carpeting is preferred. In general, the type of flooring is a personal matter.” Dean Yeonas, Yeonas and Shafran Real Estate: “Hardwood is preferred by most buyers.

How much does it cost to remove carpet and install hardwood floors?

Labor rates total $4.25 to $9.25 per square foot to remove the old carpet and replace it with hardwood flooring. Adding on to your cost to install hardwood flooring is another $3 to $14 per square foot for the wood too.

What is the best time of year to refinish hardwood floors?

If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it’s often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.

How long do wood floors last?

On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.

How do I know if my hardwood floors need refinishing?

  1. Major scratches and dents. …
  2. Cupping. …
  3. Splinters. …
  4. Gray floorboards. …
  5. Water stains. …
  6. Fading and discoloration.

Is it better to paint or do floors first?

Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that new flooring should always be installed before you have any interior painting done.